Sorption and partial molar volumes of C2 and C3 hydrocarbons in polypropylene copolymers

The sorption of C₂ and C₃ hydrocarbons in two ethylene–propylene copolymers and a propylene homopolymer and the simultaneous dilation of the polymers were measured at temperatures of 287–363 K and pressures up to 4 MPa. The sorption isotherms were well described by the Flory–Huggins theory of dissolution. Dilation isotherms in the form of elongation versus pressure were similar in shape to the corresponding sorption isotherms. Solubility coefficients, partial molar volumes, and Flory–Huggins interaction parameters were determined from these isotherms. The thermal expansivities of the hydrocarbons dissolved in the polymers were 0.002–0.005 K^?1, and the Flory–Huggins interaction parameters depended not only on temperature but also on concentration. At 323 K, the calculated solubilities of propylene in the ethylene–propylene‐rubber regions of the copolymers were 1.8 times higher than in the amorphous regions of the propylene homopolymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1255–1262, 2001     

Derivation of shell effects and magic numbers in metal clusters by the application of Strutinsky's method to the Clemenger–Nilsson and q‐deformed 3‐D harmonic oscillator models

Strutinsky's standard averaging method is applied to metal clusters described by two different potentials—Clemenger–Nilsson (CN) and q‐deformed 3‐D (Q3D) harmonic oscillator (HO). In addition, a new approximate fitting formula—of the liquid drop model type—is derived for the smooth part of the energy. The results obtained for the oscillating part of the energy (shell correction term) with the two cluster potentials through the two averaging methods are compared and discussed. It is found that with both CN and Q3D HO potentials the standard and approximate methods give similar results for clusters with a large number of particles, whereas for smaller clusters significant differences appear. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Ductile–brittle‐transition phenomenon in polypropylene/ethylene‐propylene‐diene rubber blends obtained by dynamic packing injection molding: A new understanding of the rubber‐toughening mechanism

For a more complete understanding of the toughening mechanism of polypropylene (PP)/ethylene‐propylene‐diene rubber (EPDM) blends, dynamic packing injection molding was used to control the phase morphology and rubber particle orientation in the matrix. The relative impact strength of the blends increased at low EPDM contents, and then a definite ductile–brittle (D–B) transition was observed when the EPDM content reached 25 wt %, at which point blends should fail in the ductile mode with conventional molding. Wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) were used to investigate the shear‐induced crystal structure, morphology, orientation, and phase separation of the blends. WAXD results showed that the observed D–B transition took place mainly for a constant crystal structure (α form). Also, no remarkable changes in the crystallinity and melting point of PP were observed by DSC. The highly oriented and elongated rubber particles were seen via SEM at high EPDM contents. Our results suggest that Wu's criterion is no longer valid when dispersed rubber particles are elongated and oriented. The possible fracture mechanism is discussed on the basis of the stress concentration in a filler‐dispersed matrix. It can be concluded that not only the interparticle distance but also the stress fields around individual particles play an important role in polymer toughening. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2086–2097, 2002     

Evaluation of aerosol lead measurement techniques using laboratory generated super-micrometer particles

High levels of lead in some occupational environments still exist. These include lead paint abatement sites, smelting operations, small arms firing ranges, and other construction scenarios. New emerging technologies provide the capability to provide an on-site alternative to conventional laboratory methods for airborne lead. In this paper we describe the evaluation of two such technologies using laboratory prepared lead-laden super-micron aerosol particles. Size measurements by TSI Aerodynamic Particle Sizer™ indicated the fluctuation of the peak particle sizes varying less than 1% among different runs for a given solution concentration. The content of lead embedded in the particles varied from 14 to 18% between runs of three different lead solution concentrations. A commercially available instrument for airborne lead measurement, AeroLead™, showed promise of becoming fully validated with the addition of design enhancements, although not fully validated by the end of the research program. Some of these areas being reworked by the manufacturer include working electrode issues, such as a more uniform surface area. Once these have been addressed, the manufacturer plans to complete the field and laboratory validation procedures. In a subsequent study, the ABF-LIPS results shown in this paper indicated that the technology could be used to quantify lead in aerosol form with a signal-to-noise ratio of three or larger of approximately 100 μg m⁻³ or higher quantity in a few minutes of measurement interval. The estimated detection limit for Pb using the ABF-LIPS prototype was approximately 60 μg m⁻³. In comparison the Resource Conservation and Recovery Act (RCRA) limit for Pb emission is 250 μg m⁻³.     

The selective introduction of organometallic markers into estrogens. A-ring propargylation of β-estradiol

Introduction of the propargyl dicobalt hexacarbonyl moiety onto the estradiol A ring as a potential probe in receptor studies requires protection of the ring phenolic group, and the regio-selectivity of the attack (2- versus 4-position) depends on the bulkiness of the organometallic carbenium ion.     

Conductance studies of some ammonium and alkali metal salts in propylene carbonate

Conductance data are reported for NaI, KI, RbI, CsI, NH₄I, NaClO₄, and KClO₄ in propylene carbonate at 25°C in the concentration range 1×10^–4 –8.3×10^–3M. Analysis of the data with the current conductance theories indicates negligible ion-association, strong cation-solvent and weak anion-solvent interactions.